Preventative Maintenance
Regular maintenance can help prevent major problems from occurring by addressing smaller problems. Give us a call to discuss our annual NASH FLASH service agreements, which can reduce the cost of performance tune-ups.
- Test for carbon monoxide leaks
- Clean burner assembly
- Clean ignition assembly
- Clean blower motor
- Inspect the filtration system
- Adjust blower components
- Lubricate moving parts as required
- Test and adjust safety controls if needed
- Tighten electrical connections
- Calibrate thermostat
- Check flue draft
- Check combustion
- Inspect vent piping
- Inspect humidification system
- Clean condenser coil
- Inspect evaporator coil if accessible
- Clean condensate drain
- Clean blower motor
- Inspect the filtration system
- Adjust blower components
- Lubricate moving parts as required
- Inspect for refrigerant leaks
- Test condensate pump
- Tighten electrical connections
- Test starting capabilities
- Measure air temperature differential
- Monitor refrigerant pressure
- Measure amperage and voltage
- Inspect evaporator coil
- Clean blower motor
- Inspect the filtration system
- Adjust blower components
- Lubricate moving parts as required
- Test and adjust safety controls if needed
- Tighten electrical connections
- Calibrate thermostat
- Inspect electrical heating elements
- Clean condenser coil
- Clean condensate drain
- Check defrost controls
- Inspect auxiliary heaters
- Inspect the filtration system
- Lubricate moving parts as required
- Inspect for refrigerant leaks
- Test condensate pump
- Tighten electrical connections
- Test starting capabilities
- Measure air temperature differential
- Monitor refrigerant pressure
- Measure amperage and voltage
NASH FLASH Agreements Are “The Smart Choice”
Two Performance Tune-Ups per Year
Having your system checked regularly enables us to keep your unit running as efficiently as possible, which saves you money on your utility bill month after month. These regular checkups also enable us to catch problems such as loose or burnt wires, and Freon leaks, before they lead to a larger problem such as motor failure.
Priority Service
Our NASH FLASH Customers receive priority service over other customers when they have a service issue. Our commitment to program customers means we will have a technician to your door within 24 hours of calling our office.
15 Percent off Service Call Charges
Example of savings: if the cost of a repair was $400, you would save $60 on the repair. Our discounted rates save you money with every service call. Our repair trucks are fully stocked so we are able to repair 99 percent of calls on the first visit.
Energy-Saving Coil Cleaning
Dirty coils reduce efficiency and cause your unit to work harder, causing parts to wear out faster, and shorten the life expectancy of your unit. Your unit will cost you more month after month on your utility bill if the coils are not kept clean. Tests performed by the EPA explain that as little as 1/10th of a centimeter of dirt or dust on a coil could reduce efficiency by 21 percent. Since the average homeowner’s heating and cooling bill is $1,500 per year, a 21 percent loss in efficiency means you could be wasting up to $315 each year. Additional Charges May Apply.
No Overtime Charges
Our program customers pay only a standard rate for weekend emergencies.
Labor Warranty
All of our labor services are warranted for 30 days. If you have a problem within 30 days of service, there will be no charge to come back out and diagnose the problem. We stand behind our work.